However, there are many modeling situations where a particular lighting effect may be desirable if it can be reproduced on many LEDs (series or parallel groups) or LEDs that exceed the 25mA or 5-volts DC. This is where our Booster Boards shine (forgive the pun). At just 0.8" x 1.50", these small boards increase a simulator's output up to times a Simulator's output and a DC voltage range of 9-18 VDC. This greatly expands the versatility of many of our Simulator products, especially where LEDs can be wired in series groups!

Our Simulator boards can also be programmed to perform as timer modules to turn on and off outputs in timing ranges from seconds (or even milli-seconds) to hours. When coupled with these Super Boosters a very wide range of control and automation can be performed.

Standard voltage operating range for the Super Booster Board is 6 to 18 volts DC. This voltage range is determined by the on-board voltage regulator mounted on our Simulator boards

The Boosters come in 3 flavors: N8103-1 to support a single output Simulator (i.e., N8032 Beacon), N8103-2 for 2 output Simulators (i.e., N8038 Early-era Alternating Flasher), and N8103-3 for 3-output Simulators (i.e., N8043 Universal Strobe). A Simulator is easily be piggybacked on a Booster Board (connecting wire included) and share a common power input for both